4G LTE Cat4 Endüstriyel Dual SIM Router RUT901

İletişime Geçiniz

Resim İçin Tıklayınız

RUT901 Endüstriyel Hücresel Router Teknik Spektleri

Mobile
Mobile module	4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps

3GPP Release	Release 9

SIM switch	2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status	IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD	Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list	Operator black/white list (by country or separate operators)

Multiple PDN	Possibility to use different PDNs for multiple network access and services

Band management	Band lock, Used band status display

SIM idle protection service	When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then

SIM PIN code management	SIM PIN code management enables setting, changing, or disabling the SIM card's PIN

APN	Auto APN

Bridge	Direct connection (bridge) between mobile ISP and device on LAN

Passthrough	Router assigns its mobile WAN IP address to another device on LAN


Wireless
Wireless mode	802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)

Wi-Fi security	WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect

SSID/ESSID	SSID stealth mode and access control based on MAC address

Wi-Fi users	Up to 100 simultaneous connections

Wireless Connectivity Features	Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

Wireless MAC filter	Whitelist, blacklist

Wireless QR code generator	Once scanned, a user will automatically enter your network without needing to input login information.


Ethernet
WAN	1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX

LAN	3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX


Network
Routing	Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network protocols	TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support	H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring	Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall	Port forward, traffic rules, custom rules

Firewall status page	View all your Firewall statistics, rules, and rule counters

Ports management	View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology	Visual representation of your network, showing which devices are connected to which other devices

Hotspot	Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

DHCP	Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM)	Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS	Supported >25 service providers, others can be configured manually

DNS over HTTPS	DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

Network backup	Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing	Balance Internet traffic over multiple WAN connections

SSHFS	Possibility to mount remote file system via SSH protocol (not available in standard FW)


Security
Authentication	Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall	Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention	DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN	Port and tag-based VLAN separation

Mobile quota control	Mobile data limit, customizable period, start time, warning limit, phone number

WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control	Flexible access control of SSH, Web interface, CLI and Telnet

SSL certificate generation	Let's encrypt support


VPN
OpenVPN	Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption	DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec	XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE	GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP	Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel	Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN	Method of building scalable IPsec VPNs

SSTP	SSTP client instance support

ZeroTier	ZeroTier VPN client support

WireGuard	WireGuard VPN client and server support

Tinc	Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.


MODBUS
Supported modes	Server, Client

Supported connection types	TCP

Custom registers	MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats	8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII


DATA TO SERVER
Protocol	HTTP(S), MQTT, Azure MQTT, Kinesis

Data to server	Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature


MQTT Gateway
Modbus MQTT Gateway	Allows sending commands and receiving data from MODBUS Server through MQTT broker


DNP3
Supported modes	Station, Outstation

Supported connection	TCP


DLMS
DLMS Support	DLMS - standard protocol for utility meter data exchange

Supported modes	Client

Supported connection types	TCP


Monitoring & Management
WEB UI	HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

FOTA	Firmware update from server, automatic notification

SSH	SSH (v1, v2)

SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call	Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off

TR-069	OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT	MQTT Broker, MQTT publisher

SNMP	SNMP (v1, v2, v3), SNMP Trap, Brute force protection

JSON-RPC	Management API over HTTP/HTTPS

RMS	Teltonika Remote Management System (RMS)


IoT Platforms
Cloud of Things	Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx	Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity	Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

Azure IoT Hub	Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server


Input / Output
Input	1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output	1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events	Email, RMS, SMS

I/O juggler	Allows to set certain I/O conditions to initiate event


Power
Connector	4-pin industrial DC power socket

Input voltage range	9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

PoE (passive)	Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC

Power consumption	< 2 W idle, < 7 W Max


Physical Interfaces
Ethernet	4 x RJ45 ports, 10/100 Mbps

I/O’s	1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs	1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power

SIM	2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)

Power	1 x 4-pin power connector

Antennas	2 x SMA for LTE, 2 x RP-SMA for Wi-Fi antenna connectors

Reset	Reboot/User default reset/Factory reset button


Physical Specification
Casing material	Aluminium housing, plastic panels

Dimensions (W x H x D)	110 x 50 x 100 mm

Weight	297 g

Mounting options	DIN rail, wall mount, flat surface (all require additional kit)


Operating Environment
Operating temperature	-40 °C to 75 °C

Operating humidity	10% to 90% non-condensing

Ingress Protection Rating	IP30

RUT901 Teltonika Dual SIM Endüstriyel Hücresel Router

RUT901 hücresel yönlendirici, öncülleri RUT950 ve RUT951'in en yüksek puan alan özelliklerini pazara sunuyor. Cihaz, mevcut bir yedek bağlantıya otomatik WAN yük aktarımı sağlayarak, ağ sürekliliğini garanti ederek ve kesinti süresini ortadan kaldırarak yüksek performans sağlar.

RUT 901 4G LTE (Cat 4), 3G, 2G
ÇİFT SIM Otomatik yük devretme, yedek WAN ve diğer anahtarlama senaryoları ile
WI-FI Wireless Access Point Hotspot İşlevi ile birlikte
PROTOKOLLER MQTT, Modbus TCP, DNP3 de dahil olmak üzere birçok protokolü destekler

RUT901, çok çeşitli IoT senaryolarının ihtiyaçlarını karşılamak için Wi-Fi ve dört Ethernet arayüzüyle birleştirilmiş çift SIM hücresel bağlantı özelliğine sahiptir. RutOS tarafından desteklenen bu yönlendirici, çözümünüz için gelişmiş özelleştirme seçenekleri, otomasyon özellikleri ve üst düzey güvenlik sunar.

Teltonika RUT901 4G/LTE WLAN Router Özellikleri

4G/LTE Cat 4 150 Mpbs
1 x WAN port
3 x LAN port 10/100 Mpbs
4 x RJ45 port, 10/100 Mbps
2 x SIM slots (Mini SIM – 2FF)
2 x Mobil Anten
2 x WiFi Anten
RMS

4G endüstriyel Wi-Fi routerlar, genellikle uzak bölgelerde internet erişimi sağlamak veya hareketli araçlarda (örneğin, trenler, gemiler) internet bağlantısı sağlamak için kullanılan cihazlardır. İşte bu tür routerların çalışma prensibi ve özellikleri kısaca:

4G Bağlantı: Endüstriyel Wi-Fi routerlar, genellikle 4G veya diğer mobil iletişim standartlarını destekler. Bu sayede mobil operatörlerin veri ağları üzerinden internet erişimi sağlarlar. Bazı modeller birden fazla SIM kart yuvasıyla birden fazla operatörü destekleyebilir.
Yüksek Dayanıklılık: Endüstriyel ortamlarda kullanıma uygun olarak tasarlanmışlardır. Suya, toza ve darbelere karşı dirençli olabilirler. Ayrıca geniş çalışma sıcaklık aralığına sahip olabilirler.
Geniş Kapsama Alanı: Güçlü antenleri sayesinde geniş bir kapsama alanı sağlarlar. Uzak bölgelerde veya hareketli araçlarda bile stabil bir internet bağlantısı sunabilirler.
Yüksek Veri Hızları: 4G teknolojisini destekledikleri için yüksek veri hızlarına ulaşabilirler. Bu da video akışı, uzaktan erişim gibi uygulamalar için idealdir.
Güvenlik Özellikleri: Endüstriyel Wi-Fi routerlar genellikle gelişmiş güvenlik özelliklerine sahiptir. VPN desteği, güvenli erişim kontrolleri ve firewall gibi özelliklerle ağ güvenliğini sağlarlar.
Uzaktan Yönetim ve İzleme: Bazı modeller uzaktan yönetim ve izleme özellikleri sunar. Bu sayede cihazın durumu ve performansı uzaktan takip edilebilir, sorunlar uzaktan çözülebilir.
Çoklu Bağlantı Noktaları: Birden fazla cihazın aynı anda bağlanabilmesini sağlayacak şekilde tasarlanabilirler. Böylece birçok kullanıcının aynı anda internete erişimini sağlayabilirler.

Endüstriyel Wi-Fi routerlar genellikle zorlu şartlarda çalışacak şekilde tasarlanmış olup, güvenilir ve sürekli bir internet bağlantısı sağlama amaçlı kullanılırlar.