4G LTE CAT12 Endüstriyel Router RUTX14

Yeni İletişime Geçiniz

Resim İçin Tıklayınız

RUTX14 4G LTE CAT12 Router Teknik Spektleri

MOBILE
Mobile module	4G LTE Cat 12 up to 600 DL/150 UL Mbps; 3G to to 42 DL/ 11.2 UL Mbps

SIM switch	2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status	IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD	Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list	Operator black/white list (by country or separate operators)

Multiple PDN	Possibility to use different PDNs for multiple network access and services

Band management	Band lock, Used band status display

SIM idle protection service	When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then

APN	Auto APN

Bridge	Direct connection (bridge) between mobile ISP and device on LAN

Passthrough	Router assigns its mobile WAN IP address to another device on LAN


WIRELESS
Wireless mode	802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

Wi-Fi security	WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect

SSID/ESSID	ESSID stealth mode

Wi-Fi users	Up to 150 simultaneous connections

Wireless Connectivity Features	Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

Wireless MAC filter	Whitelist, blacklist

Wireless QR code generator	Once scanned, a user will automatically enter your network without needing to input login information.


BLUETOOTH
Bluetooth 4.0	Bluetooth low energy (LE) for short range communication


ETHERNET
WAN	1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

LAN	4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover


NETWORK
Routing	Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network protocols	TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support	H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring	Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall	Port forward, traffic rules, custom rules

Firewall status page	View all your Firewall statistics, rules, and rule counters

Ports management	View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology	Visual representation of your network, showing which devices are connected to which other devices

Hotspot	Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

DHCP	Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM)	Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS	Supported >25 service providers, others can be configured manually

Network backup	Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing	Balance Internet traffic over multiple WAN connections

SSHFS	Possibility to mount remote file system via SSH protocol

VRF support	Initial virtual routing and forwarding (VRF) support


SECURITY
Authentication	Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall	Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention	DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN	Port and tag-based VLAN separation

Mobile quota control	Mobile data limit, customizable period, start time, warning limit, phone number

WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control	Flexible access control of SSH, Web interface, CLI and Telnet


VPN
OpenVPN	Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption	DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec	IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE	GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP	Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel	Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN	Method of building scalable IPsec VPNs

SSTP	SSTP client instance support

ZeroTier	ZeroTier VPN client support

WireGuard	WireGuard VPN client and server support

Tinc	Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

Tailscale	Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol


OPC UA
Supported modes	Client, Server

Supported connection types	TCP


MODBUS
Supported modes	Server, Client

Supported connection types	TCP, USB

Custom registers	MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats	8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII


DATA TO SERVER
Protocol	HTTP(S), MQTT, Azure MQTT, Kinesis

Data to server	Extract parameters from multiple sources and different protocols, and send them all to a single server


MQTT GATEWAY
Modbus MQTT Gateway	Allows sending commands and receiving data from MODBUS Server through MQTT broker


DNP3
Supported modes	Station, Outstation

Supported connection	TCP, USB


DLMS
DLMS Support	DLMS - standard protocol for utility meter data exchange

Supported modes	Client

Supported connection types	TCP, USB


MONITORING & MANAGEMENT
WEB UI	HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

FOTA	Firmware update from server, automatic notification

SSH	SSH (v1, v2)

SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call	Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off

TR-069	OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT	MQTT Broker, MQTT publisher

SNMP	SNMP (v1, v2, v3), SNMP Trap

JSON-RPC	Management API over HTTP/HTTPS

RMS	Teltonika Remote Management System (RMS)


IOT PLATFORMS
Cloud of Things	Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx	Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity	Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

Azure IoT Hub	Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type


INPUT / OUTPUT
Input	1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output	1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events	Email, RMS, SMS

I/O juggler	Allows to set certain I/O conditions to initiate event


POWER
Connector	4-pin industrial DC power socket

Input voltage range	9 - 50 VDC, reverse polarity protection, voltage surge/transient protection

PoE (passive)	Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC

Power consumption	Idle: < 4 W, Max: < 22 W


PHYSICAL INTERFACES
Ethernet	5 x RJ45 ports, 10/100/1000 Mbps

I/O’s	1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs	2 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x Power LED, 2 x 2.4G and 5G Wi-Fi LEDs

SIM	2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders

Power	1 x 4-pin power connector

Antennas	4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS

USB	1 x USB A port for external devices

Reset	Reboot/User default reset/Factory reset button


PHYSICAL SPECIFICATION
Casing material	Full aluminium housing

Dimensions (W x H x D)	132 x 44 x 95 mm

Weight	515 g

Mounting options	DIN rail, wall mount, flat surface (all require additional kit)


OPERATING ENVIRONMENT
Operating temperature	-40 °C to 75 °C

Operating humidity	10% to 90% non-condensing

Ingress Protection Rating	IP30

RUTX14 Teltonika 4G LTE CAT12 Endüstriyel Router

Teltonika RUTX14 endüstriyel hücresel router cihazı 4G LTE Cat12 teknolojisine sahiptir. Bu sayede 600Mbps download ve 150Mbps upload kapasitesine ulaşabilir. Dual SIM desteği mevcuttur. Dual SIM özelliği; auto failover, backup WAN ve diğer anahtarlama senaryoları ile kullanılabilir. Ayrıca Wave-2 802.11ac Dual Band WI-FI ve Bluetooth LE özlliklerine sahiptir. Bütün bunların yanısıra 5 adet de gigabit ethernet rj45 portu bulunur.

RUTX14, Teltonika Networks ürün yelpazesinde tek kutudaki en hızlı modem LTE-A Cat 12 yönlendiricisidir. İki SIM kart, Wave-2 çift bantlı Wi-Fi, beş Gigabit Ethernet bağlantı noktası ve otomatik yük devretme ile yüksek uyumluluk, rakipsiz ağ esnekliği ve olağanüstü hız bekleyebilirsiniz.