4G LTE CAT12 Endüstriyel Router RUTX14

İletişime Geçiniz 4G LTE CAT12 Endüstriyel Router RUTX14

RUTX14 4G LTE CAT12 Router Teknik Spektleri


 

MOBILE 
Mobile module4G LTE Cat 12 up to 600 DL/150 UL Mbps; 3G to to 42 DL/ 11.2 UL Mbps
  
SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  
StatusIMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
  
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  
USSDSupports sending and reading Unstructured Supplementary Service Data messages
  
Black/White listOperator black/white list (by country or separate operators)
  
Multiple PDNPossibility to use different PDNs for multiple network access and services
  
Band managementBand lock, Used band status display
  
SIM idle protection serviceWhen working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
  
APNAuto APN
  
BridgeDirect connection (bridge) between mobile ISP and device on LAN
  
PassthroughRouter assigns its mobile WAN IP address to another device on LAN
  
  
WIRELESS 
Wireless mode802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
  
Wi-Fi securityWPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
  
SSID/ESSIDESSID stealth mode
  
Wi-Fi usersUp to 150 simultaneous connections
  
Wireless Connectivity FeaturesWireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
  
Wireless MAC filterWhitelist, blacklist
  
Wireless QR code generatorOnce scanned, a user will automatically enter your network without needing to input login information. 
  
  
BLUETOOTH 
Bluetooth 4.0Bluetooth low energy (LE) for short range communication
  
  
ETHERNET 
WAN1 x WAN port  10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  
LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  
  
NETWORK 
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
  
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  
Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  
FirewallPort forward, traffic rules, custom rules
  
Firewall status pageView all your Firewall statistics, rules, and rule counters
  
Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
  
Network topologyVisual representation of your network, showing which devices are connected to which other devices
  
HotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
  
DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
  
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  
DDNSSupported >25 service providers, others can be configured manually
  
Network backupWi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
  
Load balancingBalance Internet traffic over multiple WAN connections
  
SSHFSPossibility to mount remote file system via SSH protocol
  
VRF supportInitial virtual routing and forwarding (VRF) support
  
  
SECURITY 
AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator
  
FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  
VLANPort and tag-based VLAN separation
  
Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number
  
WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  
Access controlFlexible access control of SSH, Web interface, CLI and Telnet
  
  
VPN 
OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
  
OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  
IPsecIKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  
GREGRE tunnel, GRE tunnel over IPsec support
  
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  
DMVPNMethod of building scalable IPsec VPNs
  
SSTPSSTP client instance support
  
ZeroTierZeroTier VPN client support
  
WireGuardWireGuard VPN client and server support
  
TincTinc offers encryption, authentication and compression in it's tunnels. Client and server support.
  
TailscaleTailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
  
  
OPC UA 
Supported modesClient, Server
  
Supported connection typesTCP
  
  
MODBUS 
Supported modesServer, Client
  
Supported connection typesTCP, USB
  
Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
  
Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
  
  
DATA TO SERVER 
ProtocolHTTP(S), MQTT, Azure MQTT, Kinesis
  
Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server
  
  
MQTT GATEWAY 
Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker
  
  
DNP3 
Supported modesStation, Outstation
  
Supported connectionTCP, USB
  
  
DLMS 
DLMS SupportDLMS - standard protocol for utility meter data exchange
  
Supported modesClient
  
Supported connection typesTCP, USB
  
  
MONITORING & MANAGEMENT 
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
  
FOTAFirmware update from server, automatic notification
  
SSHSSH (v1, v2)
  
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
  
CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
  
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  
MQTTMQTT Broker, MQTT publisher
  
SNMPSNMP (v1, v2, v3), SNMP Trap
  
JSON-RPCManagement API over HTTP/HTTPS
  
RMSTeltonika Remote Management System (RMS)
  
  
IOT PLATFORMS 
Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
  
ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  
CumulocityAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
  
Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
  
  
INPUT / OUTPUT 
Input1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
  
Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
  
EventsEmail, RMS, SMS
  
I/O jugglerAllows to set certain I/O conditions to initiate event
  
  
POWER 
Connector4-pin industrial DC power socket
  
Input voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
  
PoE (passive)Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
  
Power consumptionIdle: < 4 W, Max: < 22 W
  
  
PHYSICAL INTERFACES 
Ethernet5 x RJ45 ports, 10/100/1000 Mbps
  
I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
  
Status LEDs2 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x Power LED, 2 x 2.4G and 5G Wi-Fi LEDs
  
SIM2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
  
Power1 x 4-pin power connector
  
Antennas4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
  
USB1 x USB A port for external devices
  
ResetReboot/User default reset/Factory reset button
  
  
PHYSICAL SPECIFICATION 
Casing materialFull aluminium housing
  
Dimensions (W x H x D)132 x 44 x 95 mm
  
Weight515 g
  
Mounting optionsDIN rail, wall mount, flat surface (all require additional kit)
  
  
OPERATING ENVIRONMENT 
Operating temperature-40 °C to 75 °C
  
Operating humidity10% to 90% non-condensing
  
Ingress Protection RatingIP30

 

 

 

 

RUTX14 Teltonika 4G LTE CAT12 Endüstriyel Router


 

Teltonika RUTX14 endüstriyel hücresel router cihazı 4G LTE Cat12 teknolojisine sahiptir. Bu sayede 600Mbps download ve 150Mbps upload kapasitesine ulaşabilir. Dual SIM desteği mevcuttur. Dual SIM özelliği; auto failover, backup WAN ve diğer anahtarlama senaryoları ile kullanılabilir. Ayrıca Wave-2 802.11ac Dual Band WI-FI ve Bluetooth LE özlliklerine sahiptir. Bütün bunların yanısıra 5 adet de gigabit ethernet rj45 portu bulunur.

 

RUTX14, Teltonika Networks ürün yelpazesinde tek kutudaki en hızlı modem LTE-A Cat 12 yönlendiricisidir. İki SIM kart, Wave-2 çift bantlı Wi-Fi, beş Gigabit Ethernet bağlantı noktası ve otomatik yük devretme ile yüksek uyumluluk, rakipsiz ağ esnekliği ve olağanüstü hız bekleyebilirsiniz.

 

 

Yorum Yap

Not: HTML'e dönüştürülmez!
    Kötü           İyi

Doğrulama Kodu
  • Görünüm: 383
  • Ürün Kodu: RUTX14
  • Stok Durumu: İletişime Geçiniz

Etiketler: Teltonika RUTX14, 4G LTE CAT12, cat12 lte, 4g router, lte cat12 modem, dual sim router, hücresel router, 600mbps download, RUTX14