QNAP QXP-16G2FC FC-SAN Fiber Genişleme Kartı
Sipariş Numaraları
- QXP-16G2FC Dual-port 16Gb Gen 5 Fibre Channel expansion card
- QXP-32G2FC Dual-port 32Gb Gen 6 Fibre Channel expansion card
- TRX-16GFCSFP-SR SFP Tri-speed: 14.025Gbps/ 8.5Gpbs/ 4.25Gbp
- TRX-32GFCSFP-SR SFP Tri-speed: 28.05Gbps/ 14.025Gbps/ 8.5Gpbs
QXP-16G2FC Fiber Channel
PCIe and Lanes | PCIe Gen3 x8 |
Transmission rates | Fibre Channel 16/8/4 Gb/s (Up to 14.025 Gb/s per port) |
Form factor | Low-profile PCIe card 10.68 x 6.89 cm (4.20 x 2.71 inches) |
Supported NAS operating system | QTS 4.4.1 / QuTS hero 4.5.0 (or later) for QNAP NAS with PCIe slots as a FC Target. |
Bracket | Low-profile bracket pre-installed; full-height and specialized (for selected QNAP NAS) brackets are bundled |
Port and cable | 16Gb Transceiver* (bundled with 2 x TRX-16GFCSFP-SR short wavelength SFP+ transceivers) and Fibre LC Cable (optical purchase) |
Operating Temperature | 0°C to 45°C (32°F to 113°F) |
Storage temperature | –20°C to 70°C (–4°F to 158°F) |
Relative humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Note | *Only QNAP certified transceivers are supported. Note: QNAP Fibre Channel cards can only be installed in a QNAP NAS (with the QTS or QuTS hero operating system) as a Fibre Channel Target. Windows®, Linux®, and other systems are not supported. |
QNAP QXP-16G2FC Dual-port 16Gb Enhanced Gen 5 Fibre Channel expansion card with SFP+ transceivers
QNAP NAS, çok çeşitli Fiber Kanal (FC) HBA'yı destekler (Marvell® QLogic, ATTO® Celerity™ ve QNAP FC kartları dahil). FC kartlarını NAS'a hedef modunda takarak, NAS'ı bir SAN depolama aygıtı olarak kullanabilirsiniz. Marvell® QLogic ve ATTO® Celerity™ FC kartları, verilerinizi yedeklemek/erişim için QNAP NAS FC depolama hedefine kolayca bağlanmanız için başlatıcı modunda Windows, Linux ve VMware ana bilgisayarlarında da kullanılabilir.