Ruijie RG-AP630(IODA) 802.11ac Outdoor Wireless Access Point
Ruijie RG-AP630(IODA) 802.11ac Outdoor Wireless Access Point Sipariş Bilgileri
Model | Description |
RG-AP630(IODA) | Outdoor Wireless Access Point, IP67 rating, built-in omnidirectional smart antenna and lightning arrester, 3×3 MIMO, 3 spatial streams, support internal/external antenna switching, support concurrent 802.11a/b/g/n/ac, FAT/FIT mode, PoE+ (Installation Mount-Kit included, but PoE adaptor sold separately) |
Optional Accessories | |
RG-S2910-24GT4SFP-UP-H | 24 10/100/1000BASE-T ports for downlink and 4 Gigabit SFP ports (non-combo) for uplink. To support HPOE(Port1~4), POE+, POE, 1 console port |
Optional External Antennas | |
RG-ANTx3-2400D | 2.4GHz MIMO Outdoor Directional Antenna Kit, include: |
15dBi panel antenna (1 set); | |
1-meter N-N coaxial cables (3 sets); | |
waterproof materials (1 set) | |
RG-ANTx3-5800D | 5.8GHz MIMO Outdoor Directional Antenna Kit, include: |
19dBi panel antenna (1 set); | |
1-meter N-N coaxial cables (3 sets); | |
waterproof materials (1 set) | |
RG-ANTx3-2400&5800(O) | 2.4GHz & 5.8GHz MIMO Outdoor Omnidirectional Antenna Kit, include: |
8dBi panel antenna (1 set); | |
1-meter N-N coaxial cables (6 sets); | |
waterproof materials (2 sets) |
Ruijie RG-AP630(IODA) 802.11ac Outdoor Wireless Access Point Teknik Spektleri
Model | RG-AP630(IODA) | |
Target Deployments | For big campus, wireless city, harbour, storage room, mine | |
Basic Specifications | Radio | Concurrent dual-radio dual-band |
Protocol | 802.11a/b/g/n/ac | |
Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz | |
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz | ||
(vary depending on countries) | ||
Antenna | Built-in Omnidirectional Smart Antenna (support external/internal antenna switching) | |
Antenna Gain | 4dBi | |
Max Throughput | 450Mbps@2.4GHz | |
1.3Gbps@5GHz | ||
1.75Gbps per AP | ||
Spatial Streams | 3 | |
Modulation | OFDM: BPSK@6/9Mbps | |
QPSK@12/18Mbps | ||
16-QAM@24Mbps | ||
64-QAM@48/54Mbps | ||
DSSS: DBPSK@1Mbps | ||
DQPSK@2Mbps | ||
CCK@5.5/11Mbps | ||
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM | ||
Receiver Sensitivity | 11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps) | |
11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), - 77dBm(54Mbps) | ||
11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15 | ||
11ac HT20: -90dBm (MCS0) , -63dBm (MCS9) | ||
11ac HT40: -85dBm(MCS0) , -60dBm (MCS9) | ||
11ac HT80: -82dBm(MCS0) , -58dBm (MCS9) | ||
Maximum Transmit Power | 27dBm | |
Note: The transmit power is configurable to up to 15dBm in 1dBm steps. The actual transmit power depends on local laws and regulations. | ||
Adjustable Power | 1dBm | |
IP Rating | IP67 | |
Ports | Service Port | 1 10/100/1000Mbps ETH1/PoE IN port (RJ-45 connector); |
1 SFP port (combo with ETH1) | ||
Management Port | 1 Console Port(RJ45 or Bluetooth) | |
Power | Power Supply | PoE+ (802.3at) |
Power Consumption | <25W | |
WLAN | Maximum clients per AP | Up to 256 |
SSID capacity | Up to 16 per radio | |
Up to 32 per AP | ||
SSID hiding | Support | |
Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID | Support | |
Remote Intelligent Perception Technology (RIPT) | Support | |
X-speed | Support | |
Intelligent load balancing based on the number of users or traffic | Support | |
STA control | SSID/radio-based | |
Bandwidth control | STA/SSID/AP-based speed control | |
Preference for 5GHz (band select) | Support | |
Wireless position tracking | Support | |
Dynamic Frequency Selection(DFS) | Future Release Support | |
Security | PSK, Web, and 802.1x authentication | Support |
Data encryption | WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) | |
QR code authentication | Support | |
SMS authentication | Support | |
PEAP authentication | Support | |
Data frame filtering | Whitelist, static/dynamic blacklist | |
User isolation | Support | |
Rogue AP detection and countermeasure | Support | |
Dynamic ACL assignment | Support | |
WAPI | Support | |
RADIUS | Support | |
CPU Protection Policy (CPP) | Support | |
Network Foundation Protection Policy (NFPP) | Support | |
Wireless Intrusion Detection System(WIDS) | Support | |
Wireless Intrusion Prevention System (WIPS) | Support | |
Routing | IPv4 address | Static IP address or DHCP reservation |
IPv6 CAPWAP tunnel | Support | |
ICMPv6 | Support | |
IPv6 address | Manual or automatic configuration | |
Multicast | Multicast to unicast conversion | |
Management and Maintenance | Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and web management |
Visualized wireless heat map analysis | Support | |
(need to integrate with SNC) | ||
Real-time spectrum analysis | Support | |
(need to integrate with SNC) | ||
Fault detection and alarm | Support | |
Cloud AC management | Support | |
Statistics and logs | Support | |
FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. | |
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. | ||
External Characteristics | Lock | Support |
LED Indicators | Power status and WDS signal strength | |
Relevant Standard | Wi-Fi Alliance Certification | Support |
Safety Standard | GB4943, UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22 | |
EMC Standard | GB9254-2008, EN301 489, EN55022, FCC Part15 | |
Health Standard | FCC Bulletin OET-65C ,EN 50385, IC Safety Code 6 | |
Radio Standard | FCC Part15,EN300328, EN301893 | |
Vibration Standard | GB/T 2423 | |
Dimensions (W x D x H) (mm) | 276 × 246 × 90 | |
Specifications | Weight | <2.5kg |
Work Environment | Temperature | Operating Temperature: -40°C to 55°C |
Storage Temperature: -40°C to 70°C | ||
Humidity | Operating Humidity: 5% to 95% (non-condensing) | |
Storage Humidity: 5% to 95% (non-condensing) | ||
Installation Mode | Wall/pole-mount installation |
Ruijie RG-AP630(IODA) 802.11ac Dış Mekan Kablosuz Wi-Fi Access Point
Ruijie RG-AP630(IODA), dış mekan gibi zorlu ortamlarda yüksek hızlı kablosuz ağ uygulamaları için 802.11ac wi-fi kablosuz erişim noktasıdır.
RG-AP630 (IODA), 1,75 Gbps'ye kadar bağlantı hızına sahiptir. RG-AP630, güvenlik, RF kontrolü, mobil erişim, QoS, kesintisiz dolaşım ve diğer Wi-Fi gereksinimleri için geliştirilmiştir.
Ruijie RG-WS Kablosuz Denetleyici Serisi/Cloud AC ile birarada çalışmak üzere konfigüre edilen AP'ler, Wi-Fi kullanıcı verileri iletme, gelişmiş güvenlik ve erişim kontrolü sağlar.
Endüstriyel sınıf AP gövdesi (IP67 sınıfı), aşırı dış ortam koşullarına dayanabilir ve bu nedenle cihaz kurulumunu ve bakımını basitleştirir. RG-AP630(IODA), dahili omnidirectional ve çeşitli tiplerde harici anten seçenekleri de mevcuttur. AP modelleri, harici ve dahili antenler arasında otomatik geçişi destekler.
RG-AP630 Dış Mekan AP Serisinin öne çıkan özellikleri:
• 802.11ac Üstün Kablosuz Performansı
• Tümleşik Omni Anten (opsiyonel Harici Anten) ve yıldırım koruyucu ekipman
• Olağanüstü Çevre Uyumluluğu (IP67, -40-55°C)
Yüksek Performans ve Güvenilirlik
- 802.11ac Üstün Kablosuz Performansı
- AP630'un (IODA) Dahili Akıllı Anteni
- Sektörün En Esnek Gigabit Uplink'i
- Kullanımı kolay Montaj Kiti
- Sorunsuz kurulum için Hepsi Bir Arada Paket
- Esnek WDS Modu
- Akıllı Cihaz Tanıma
- Sektörde Lider Yerel Yönlendirme Teknolojisi
- Görülmemiş Roaming Deneyimi
- Bol QoS Politikaları
- Üstün Çevre Uyumluluğu
- Geniş Çalışma Sıcaklığı Aralığı
Kapsamlı Güvenlik Politikaları
- Kullanıcı Veri Şifreleme
- Sanal AP Teknolojisi
- Standart CAPWAP Şifreleme
- RF Güvenliği
- Kullanıcı Erişim Kontrolü
- Kablosuz Koruma
- Kablosuz IPv6 Erişimi
- Esnek Cihaz Yönetim Modu
- FAT ve FIT Modları Arasında Esnek Geçiş
- Sıfır Yapılandırma ile Basit Dağıtım
- Kapsamlı Uzaktan Yönetim
- Kolay Dağıtım ve Bakım için PoE Bağlantı Noktası