EK1100 Beckhoff EtherCAT Fieldbus Coupler

İletişime Geçiniz

Resim İçin Tıklayınız

EK1100 ürününe ait teknik katalog için tıklayın

EK1100 Beckhoff EtherCAT Fieldbus Coupler Portları

EK1100_port

EK1100 Beckhoff EtherCAT Fieldbus Coupler Teknik Özellikleri

Technical data
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat.5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Bus interface	2 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Current consumption from US	70 mA + (∑ E-bus current/4)
Current consumption from UP	load
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature	-25…+60 °C/-40…+85 °C
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos.	IP20/variable
Approvals/markings	CE, UL, ATEX, IECEx, DNV GL, cFMus
Ex marking	ATEX:
	II 3 G Ex nA IIC T4 Gc
	IECEx:
	Ex ec IIC T4 Gc
	cFMus:
	Class I, Division 2, Groups A, B, C, D
	Class I, Zone 2, AEx ec IIC T4 Gc

Housing data	EK-44-8pin
Design form	compact terminal housing with signal LEDs
Material	polycarbonate
Dimensions (W x H x D)	44 mm x 100 mm x 68 mm
Installation	on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of	double slot and key connection
Marking	labeling of the BZxxx series
Wiring	solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-section	s*: 0.08…2.5 mm²,
	st*: 0.08…2.5 mm²,
	f*: 0.14…1.5 mm²
Connection cross-section AWG	s*: AWG 28…14,
	st*: AWG 28…14,
	f*: AWG 26…16
Stripping length	8…9 mm
Current load power contacts	Imax: 10 A

Beckhoff EK1100 FieldBUS EtherCAT Coupler

EK1100 EtherCAT Coupler Fieldbus level'ındaki EtherCAT protokolü ile EtherCAT terminalleri arasında bağlantı sağlar. 100BASE-TX'den Ethernet gelen verileri E-bus sinyaline dönüştürür. 2 Adet RJ45 portu vardır. Üst RJ45 Port coupler'ı etherCAT ağına bağlamak için, alt RJ45 Port ise aynı segmentteki diğer EtherCAT cihazlarının isteğe bağlı olarak bağlanması için kullanılır. Üzerindeki 2 adet 24VDC çıkış ile hem genel sistemin hem de fieldbus tarafın beslenmesini sağlar.

Teknik Özellikler