RF Spektrum Analizörü @ FSA-100
Ürüne ait teknik katalog için tıklayın |
Model | FSA-100A | FSA-100B | |
Measurement Mode | |||
Sweep mode | frequency sweep, adjacent channel power ratio, channel power, OBW/EBW, carrier-to-noise ratio | ||
Zero bandwidth mode | AM, FM, FFT, IQ Demodulation | ||
Frequency | |||
Frequency Range | 9 kHz to 6GHz | 9 kHz to 4GHz | |
Counter resolution | 1 Hz | ||
Frequency Range | 0Hz,100 Hz ~6GHz | ||
Frequency Resolution | 1 Hz | ||
Frequency Reference Source | |||
Master Frequency | 100 MHz | ||
Initial Accuracy(15℃ to 35℃) | <±1 ppm | ||
Temperature Stability | <±0.5 ppm | ||
Aging Rate | <1.5 ppm/ year | ||
SSB Phase Noise @1GHz | |||
10 kHz Carrier offset | <-90 dBc/Hz (Typ.) | ||
100 kHz Carrier offset | <-100 dBc/Hz (Typ.) | ||
1 MHz Carrier offset | <-115 dBc/Hz (Typ.) | ||
Bandwidth | |||
Resolution Bandwidth RBW (-3dB) | 1 Hz to 3 MHz, 1-3-10 step | ||
Filter Shape Factor (60dB:3dB) | <5 | ||
Video Bandwidth VBW (-3 dB) | 1 Hz to 3 MHz, 1-3-10 step | ||
Amplitude | |||
Amplitude Range | Displayed Average Noise Level(DANL)to +27 dBm | ||
Amplitude Accuracy | ±1.5dB | ||
Reference Level Range | -160dBm - +40dBm | ||
RF Attenuator Range | 0dB-55dB,5dB step | ||
Amplitude Units | dBm/dBv/dBmV/dBuV/V/mV/uV/W/mW/uW/nW/pW | ||
Maximum DC Voltage | 50 V | ||
Maximum damage level | CW Signal: +28 dBm (50MHz~6GHz) Pulse Signal: +31 dBm (50MHz~6GHz) Note: RF attenuation is 30dB | ||
+10 dBm (9kHz~50MHz) | |||
Displayed Average Noise Level(DANL) | |||
Test conditions: Reference level -40dBm, RF attenuation 0 dB, trace the average number≥ 50, normalized to 1 Hz, 20℃ to 30℃, input impedance 50 Ω | |||
Preamplifier Off | 9 kHz to 10MHz | <-143 dBm (Typ.) | |
10MHz to 1GHz | <-157 dBm (Typ.) | ||
1 GHz to 2 GHz | <-156 dBm (Typ.) | ||
2GHz to 3 GHz | <-152 dBm (Typ.) | ||
3 GHz to 4 GHz | <-152 dBm (Typ.) | ||
4 GHz to 5 GHz | <-146 dBm (Typ.) | ||
5 GHz to 6 GHz | <-145 dBm (Typ.) | ||
Preamplifier On | 9 kHz to 10MHz | <-147 dBm (Typ.) | |
10MHz to 1GHz | <-165 dBm (Typ.) | ||
1 GHz to 2 GHz | <-165 dBm (Typ.) | ||
2GHz to 3 GHz | <-163 dBm (Typ.) | ||
3 GHz to 4 GHz | <-164 dBm (Typ.) | ||
4 GHz to 5 GHz | <-159 dBm (Typ.) | ||
5 GHz to 6 GHz | <-155dBm (Typ.) | ||
Display Functoin | |||
Display | |||
Display Grid | 1,2,3,5,10,15,20dB | ||
Points | |||
Normal Bandwidth | 551(Typ.) | ||
Zero Bandwidth | 1024 | ||
Trace | |||
Number | 4 | ||
Function | Max. Hold, Min. Hold, Video Average, Power Average, Freeze, Refresh | ||
Display Mode | Only memory, Only data, Data And Memory, Data +/- Memory, Data to Memory | ||
RF Input VSWR | |||
Test Condition: (RF attenuation ≥ 10 dB) | |||
VSWR | 300 kHz to 3 GHz | <2 (Nominal Value) | |
3 GHz to 6 GHz | <2 (Nominal Value) | ||
Nonlinear Index | |||
Second Harmonic Distortion | Test conditions: RF attenuation 10 dB, Input -30 dBm | ||
10MHz - 1.5GHz | <-60dBc | ||
1.5GHz - 3GHz | No | ||
Third Order Intermodulation | Test conditions: RF attenuation 10dB, Input -20dBm, Frequency Interval 1MHz | ||
30 - 3000MHz | +12dBm | ||
3000 - 6000MHz | +10dBm | ||
Spurious Response | |||
Vestigital Spurious | <-90dBm, RF attenuation 0dB | ||
Input Correlation Spurious | <-80dbc Test conditions: RF attenuation 0dB, Input -20 dBm | ||
Medium Frequency Feed Through | <-55dBc; Medium Frequency =25MHz | ||
Image Rejection | <-60dbc @ F1±250MHz (F1: Input Frequency) | ||
Scan | |||
Scan time | Scan width ≥ 100 Hz | 1 ms to 2,000 s | |
Zero Scan | 80μs to 300 s | ||
Scan mode | Auto, Single | ||
Trigger | |||
Free to trigger |
| ||
Video trigger | Threshold editable | ||
Detection | |||
Detection methods | Positive Peak, Negative Peak, Sample, RMS, Standard | ||
Connector | |||
Radio-Frequency Signal Input | Impedance | 50 Ω | |
Connector | N type Female | ||
Reference Source | |||
Internal Reference Clock | Frequency | 100 MHz, ±1 ppm | |
External Reference Clock Input | Frequency | 100 MHz | |
Input Level | 0 dBm to +10 dBm | ||
Impedance | 50 Ω | ||
Connector | SMA (F) | ||
Communication Interface | |||
USB 1 | Connector | Type A | |
USB 2 | Connector | Type B | |
LAN Port | Connector | 10/100M, RJ-45 | |
AC Adapter | |||
Input Voltage Range | 100 V to 240 V AC, 50~60Hz | ||
output voltage range | 16 V DC/3.75A | ||
General Specification | |||
Language | Chinese, English | ||
Display Screen | 7 inch Capacitive Touch screen, 1024×600 Pixels | ||
Internal Storage | 16GB SD Card | ||
Battery | 11.8V, 7800 mAh lithium battery | ||
Power consumption | 16 W (Typ.) | ||
Environment | |||
Temperature | Operating Temp. Range | -10℃ to 55℃ | |
Storage Temp. Range | -40℃ to 70℃ | ||
Humidity | 0℃ to 30℃ | ≤ 95% | |
30℃ to 40℃ | ≤ 75% | ||
Altitude | Operation Altitude | ≤ 2000 Metres | |
Dimensions | |||
(L×W× H) | 290 mm × 175 mm × 75 mm | ||
Weight | |||
Weight (Including Battery) | 2. 8 kg |
FSA-100 @ RF Spektrum Analizörü
Özellikler
- Tamamen dijital IF teknolojisi
- Frekans aralığı : 9KHz - 6GHz
- -165dBm/Hz'e kadar minimum display noise level (DANL)
- 100dB'ye kadar Power dynamic range
- Maximum continuous input power >= 27dBm
- SSB phase noise -90dBc/Hz @10kHz offset (typical)
- Minimum RBW is 1Hz
- RF Attenuator Range : 0~55dB, 5dB
- ACPR, channel power, transmit bandwidth, occupied bandwidth, C/I Ölçüm Desteği
- Sıfır bant genişliğinde AM, FM, FFT, IQ demodülasyonunu destekler
- 7 inç renkli dokunmatik LCD ekran, yüksek çözünürlüklü
- Toplu düzenleme/silme/filtreleme desteği
- Normal, siyah beyaz, gece görüşü, vurgulama ve diğer görüntüleme modlarını destekler.