4G LTE Cat4 Endüstriyel Hücresel Router RUT906

İletişime Geçiniz

Resim İçin Tıklayınız

RUT906 4G LTE Cat4 Endüstriyel Hücresel Router Teknik Spektleri

Mobile
Mobile module	4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps

3GPP Release	Release 10/11 depending on the hardware version

SIM switch	2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status	IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD	Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list	Operator black/white list (by country or separate operators)

Band management	Band lock, Used band status display

SIM idle protection service	When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then

SIM PIN code management	SIM PIN code management enables setting, changing, or disabling the SIM card's PIN

APN	Auto APN

Bridge	Direct connection (bridge) between mobile ISP and device on LAN

Passthrough	Router assigns its mobile WAN IP address to another device on LAN


Wireless
Wireless mode	802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)

Wi-Fi security	WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect

SSID/ESSID	ESSID stealth mode

Wi-Fi users	Up to 100 simultaneous connections

Wireless Connectivity Features	Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

Wireless MAC filter	Whitelist, blacklist

Wireless QR code generator	Once scanned, a user will automatically enter your network without needing to input login information.


Ethernet
WAN	1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX

LAN	3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX


Network
Routing	Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network protocols	TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support	H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring	Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall	Port forward, traffic rules, custom rules

Firewall status page	View all your Firewall statistics, rules, and rule counters

Ports management	View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology	Visual representation of your network, showing which devices are connected to which other devices

Hotspot	Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

DHCP	Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM)	Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS	Supported >25 service providers, others can be configured manually

DNS over HTTPS	DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

Network backup	Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing	Balance Internet traffic over multiple WAN connections

SSHFS	Possibility to mount remote file system via SSH protocol


Security
Authentication	Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall	Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention	DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN	Port and tag-based VLAN separation

Mobile quota control	Mobile data limit, customizable period, start time, warning limit, phone number

WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control	Flexible access control of SSH, Web interface, CLI and Telnet

SSL certificate generation	Let's encrypt support


VPN
OpenVPN	Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption	DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec	XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE	GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP	Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel	Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN	Method of building scalable IPsec VPNs

SSTP	SSTP client instance support

ZeroTier	ZeroTier VPN client support

WireGuard	WireGuard VPN client and server support

Tinc	Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.


BACNET
Supported connection types	RS485, TCP

Supported modes	Router


OPC UA
Supported modes	Client, Server

Supported connection types	TCP


DNP3
Supported modes	Station, Outstation

Supported connection types	RS232, RS485, TCP, USB


MODBUS
Supported modes	Server, Client

Supported connection types	RTU (RS232, RS485), TCP, USB

Custom registers	MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats	8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII


DATA TO SERVER
Protocol	HTTP(S), MQTT, Azure MQTT, Kinesis

Data to server	Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature


MQTT Gateway
Modbus MQTT Gateway	Allows sending commands and receiving data from MODBUS Server through MQTT broker


DLMS
DLMS Support	DLMS - standard protocol for utility meter data exchange

Supported modes	Client

Supported connection types	RS232, RS485, TCP


Monitoring & Management
WEB UI	HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

FOTA	Firmware update from server, automatic notification

SSH	SSH (v1, v2)

SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call	Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off

TR-069	OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT	MQTT Broker, MQTT publisher

SNMP	SNMP (v1, v2, v3), SNMP Trap, Brute force protection

JSON-RPC	Management API over HTTP/HTTPS

RMS	Teltonika Remote Management System (RMS)


IoT Platforms
Cloud of Things	Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx	Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity	Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

Azure IoT Hub	Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs.


Location Tracking
GNSS	GPS. (GLONASS, BeiDou, Galileo and QZSS - under development)

Coordinates	GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA	NMEA 0183

NTRIP	NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

Server software	Supported server software TAVL, RMS

Geofencing	Configurable multiple geofence zones


Serial
RS232	DB9 connector, RS232 (with RTS, CTS flow control), 300 to 115200 baud rate

RS485	RS485 Full Duplex (4 wires) and Half-Duplex (2 wires), 300-230400 baud rate

Serial functions	Console, Serial over IP, Modem


USB
Data rate	USB 2.0

Applications	Samba share, USB-to-serial

External devices	Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter

Storage formats	FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4


Input / Output
Input	1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)

Output	1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)

Events	Email, RMS, SMS

I/O juggler	Allows to set certain I/O conditions to initiate event


Power
Connector	4-pin industrial DC power socket

Input voltage range	9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

PoE (passive)	Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC

Power consumption	< 2 W idle, < 7 W Max


Physical Interfaces
Ethernet	4 x RJ45 ports, 10/100 Mbps

I/O’s	2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector

Status LEDs	1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power

SIM	2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)

Power	1 x 4-pin power connector

Input/output	1 x 10-pin industrial socket for inputs/outputs

Antennas	2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS

USB	1 x USB A port for external devices

RS232	1 x DB9 socket

RS485	1 x 6-pin industrial socket

Reset	Reboot/User default reset/Factory reset button


Physical Specification
Casing material	Aluminium housing, plastic panels

Dimensions (W x H x D)	109.5 x 50 x 100 mm

Weight	295 g

Mounting options	DIN rail, wall mount, flat surface (all require additional kit)


Operating Environment
Operating temperature	-40 °C to 75 °C

Operating humidity	10% to 90% non-condensing

Ingress Protection Rating	IP30

RUT906 4G LTE Cat4 Endüstriyel RS232/RS485 Hücresel Yönlendirici

Industrial Cellular Router. RS232 RS485 Wi-Fi yönlendirici RUT906, seri arayüzleri RS232 ve RS485, MQTT, BACnet, I/O'lar, Ethernet ve daha fazlasını destekleyen, endüstriyel IoT uygulamaları için hücresel 4G yönlendirici. Bu hücresel yönlendirici, Çift SIM, otomatik yük devretme ve yedek WAN gibi GNSS ve arıza güvenliği özellikleriyle donatılmıştır.

RUT 906 4G LTE (Cat 4), 3G, 2G
ÇİFT SIM Otomatik yük devretme, yedek WAN ve diğer anahtarlama senaryoları ile
ARAYÜZLER VE PROTOKOLLER Seri arayüzler (RS232 ve RS485), MQTT, BACnet, OPC UA, I/O'lar, Ethernet ve daha fazlası
GNSS NTRIP, konum hizmetleri ve zaman senkronizasyonu

Özellikler

BAĞLANTI: 4G LTE (Cat 4), 3G, 2G
ÇİFT SIM: Otomatik yük devretme, yedek WAN ve diğer anahtarlama senaryoları ile
ÇOKLU ARAYÜZLER: Ethernet, Seri (RS232, RS485) ve çoklu Giriş/Çıkış
GNSS: Konum hizmetleri ve zaman senkronizasyonu için Küresel Navigasyon Uydu Sistemi