USB to Seri RS232/RS485/TTL İzolasyonlu Çevirici
CLR-USB-C110T USB to Seri RS232/RS485/TTL İzolasyonlu Çevirici Teknik Özellikleri
- Product type: industrial optically isolated converter
Baudrate: 300-921600bps
Host port: USB
Device port: RS485/RS232/TTL
USB:
Operating voltage: 5V
Connector: USB-B
Protection: 200mA self-recovery fuse, isolated output
Transmission distance: ~5m
RS485:
Connector: screw terminal
Pins: A+, B-, GND
Direction control: hardware automatic control
Protection: 600W lightning-proof and surge-suppress, 15KV ESD protection (reserved 120R balancing resistor solder pads)
Transmission distance: ~1200m
Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
RS232:
Connector: DR9 male
Protection: TVS diode, surge protection, ESD protection
Transmission distance: ~15m
Transmission mode: point-to-point
TTL (UART):
Operating voltage: 3.3V/5V
Connector: screw terminal
Pins: TXD, RXD, GND
Protection: clamp protection diode, over-voltage/negative-voltage proof, shock resistance
Transmission mode: point-to-point
LED indicators:
PWR: red power indicator, light up when there is USB connection and voltage is detected
TXD: green TX indicator, light up when the USB port sends data
RXD: blue RX indicator, light up when the device ports send data back
Operating environment:
Temperature: -15℃ ~ 70℃
Humidity: 5%RH ~ 95%RH
Operating system: Windows 10 / 8.1 / 8 / 7 / XP
Waveshare USB to Seri RS232/RS485/TTL İzolasyonlu Çevirici
Endüstriyel sistemlerde yaygın olarak kullanılan RS232, RS485 ve TTL arayüzlerine sahip ekipmanlarla USB arayüzüne sahip cihazlar arasında veri iletimi sağlayan, endüstriyel sınıf izolasyonlu USB RS232/RS485/TTL dönüştürücüdür. FT232RL entegresi bulunmaktadır.
Temel Teknik Özellikler
- USB TO RS232, USB TO RS485, USB TO TTL (UART)
- Adopt original FT232RL, fast communicating, stable and reliable, better compatibility
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
- Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
- Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering each other
- Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
- Aluminium alloy enclosure with sand blasting and anodic oxidation, CNC process opening, solid and durable
- 3 LEDs for indicating the power and transceiver status
- High quality USB-B and RS232 connectors, smoothly plug/pull