NP5200 @ Seri RS232/RS485/RS422 Ethernet Çevirici

İletişime Geçiniz

Resim İçin Tıklayınız

NP5200 Serisi 1/2/4 Port Seri RS232/RS485/RS422 Ethernet Dönüştürücü'leri aşağıdaki sipariş numaraları ile sipariş edebilirsiniz.

Model No	100M RJ45 Copper Port	(RS-232/485/422)	Power Supply
NP5200-2T-4DI(3IN1)-DB	2	4	12~48VDCdual power supply
NP5200-2T-2DI(3IN1)-DB	2	2
NP5200-2T-1DI(3IN1)-DB	2	1

NP5200 Serisi 1/2/4 Port Seri RS232/RS485/RS422 Ethernet Dönüştürücü Özellikleri

Ethernet	Standard: 10Base-T, 100Base-TX
	Protocol: TCP, UDP, ARP, HTTP, HTTPS, TELNET, ICMP, SMTP, SNTP, DHCP, DNS
	Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning
	Interface form: RJ45
	Interface quantity: 2
	Duplex mode: Full/Half Duplex Mode Self-adaption
	Work mode: each serial port can simultaneously establish up to 4 TCP/UDP session connections, support work modes such as RealCom, Reverse RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast, Telnet, Reverse Telnet, RFC2217, Redundant COM, DRDAS RealCom and DRDAS TCP Server
Serial Port	Standard: EIA RS-232C, RS-485, RS-422
	Quantity of serial port: 1/2/4/8 3IN1 serial ports
	RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD
	RS-485 signal: D+, D-, GND
	RS-422 signal: T+, T-, GND, R+, R-
	Baud rate: 110bps-115200bps
	Data bit: 5bit, 6bit, 7bit, 8bit
	Parity bit: None, Even, Odd, Space, Mark
	Stop bit: 1bit, 1.5bit, 2bit
	Interface form: DB9
	Flow control: RTS/CTS, DTR/DSR, XON/XOFF
	Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC)
	Load capacity: RS-485/422 end supports 32 points polling (customizable 256 points)
	Transmission distance: RS-232, 15m; RS-485/422, 1200m
	Pull high/low resistor for RS-485: 4.7kΩ
	Electromagnetic isolation strength: 2kVDC
Console Port	CLI command line management port (RS-232), RJ45
Configuration Method	WEB configuration management, TELNET configuration, Windows configuration tool, SSHD configuration
Security	User right classification, IP address filtering, MAC address filtering, SNMP/ Mail /System Log alarm, HTTP/HTTPS/SSHD/TELNET access control
Indicator	Power supply indicator, Ethernet port indicator, serial port indicator, running indicator
Power Supply	NP5200-2T-4DI(3IN1)-DB
	The power supply access terminal is 6-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins in the left)
	Input power supply: 12~48VDC, dual power supply redundancy
	NP5200-2T-2DI(3IN1)-DB、NP5200-2T-1DI(3IN1)-DB
	The power supply access terminal is 8-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins in the left)
	Input power supply: 12~48VDC, dual power supply redundancy
Power Consumption	Available Models	No-load	Full-load
		(@12VDC)	(@12VDC)
	NP5200-2T-4DI(3IN1)-DB	1.68W	2.5W
	NP5200-2T-2DI(3IN1)-DB	1.8W	1.9W
	NP5200-2T-1DI(3IN1)-DB	1.4W	1.6W
Working Environment	Operating temperature: -40~75℃
	Storage temperature: -40~85℃
	Relative humidity: 5%～95%(no condensation)
Physical Characteristic	Housing: IP40 protection, metal
	Installation: DIN-Rail mounting
	NP5200-2T-4DI(3IN1)-DB：
	Dimension (W x H x D): 53mm×138mm×110mm
	Weight: 591g
	NP5200-2T-2DI(3IN1)-DB：
	Dimension (W x H x D): 33mm×138mm×110mm
	Weight: 470g
	NP5200-2T-1DI(3IN1)-DB：
	Dimension (W x H x D): 33mm×138mm×110mm
	Weight: 461g
Industrial Standard	IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
	Air discharge: ± 8kV
	Contact discharge: ±6kV
	IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
	Power supply: ±2kV
	Signal: ±1kV
	IEC 61000-4-5 (Surge), Level 3
	Power supply: common mode±2kV, differential mode±1kV
	Signal: common mode ±2kV, differential mode ±1kV
	Shock: IEC 60068-2-27
	Free fall: IEC 60068-2-32
	Vibration: IEC 60068-2-6
Authentication	CE, FCC, RoHS

3Onedata NP5200 1/2/4 Port RS232/RS485/RS422 10/100M Ethernet Seri Sunucu

Seri RS232/RS485/RS422 arayüzleri üzerinden kontrol edilen cihazlara TCP/IP ethernet ağı üzerinden erişimi sağlar. Bu sayede sahadaki cihazlara ethernet network üzerinden uzaktan bağlanarak cihazın kontrolü ve veri akışı gerçekleştirilir.

Özellikle otomasyon sistemlerinde PLC / PAC kontrolü , sayaçların uzaktan okunması ve verilerin sorgulanması gibi bir çok uygulamada kullanılır. Ayrıca ethernet ağ üzerinden RS232/485/422 mesafe uzatıcı olarak işlev görür. Örneğin Yangın İhbar Santrallerinin ethernet ağı üzerinden haberleşmesini sağlar.