ICPE2300 DIN-Rail Industrial Indoor 5G Wireless Router
ICPE2300 Indoor 5G Wireless Router Sipariş Numaraları
Available Models | Gigabit | Antenna Interface | Serial Port | CAN | I/O Port | Power Supply | |||||
COMBO | RJ45 | 2.4G | 5.8G | 5G Sub-6G | RS-232 | RS-485/422 | DI | DO | |||
ICPE2300A-BW-8A25-1GC3GT-PD2P12_48 | 1 | 3 | 2 | 2 | 4 | - | - | - | - | - | 12~48VDC or PoE power receiving |
ICPE2300-2A-1GC3GT-2C4D4IO-2225-2LV | 1 | 3 | 2 | 2 | 4 | 2 | 2 | 2 |
ICPE2300 Serisi Indoor 5G Wireless Router Teknik Özellikleri
Standard & Protocol | IEEE 802.3 for 10Base-T |
IEEE802.3u for 100Base-TX | |
IEEE 802.3ab for 1000Base-T | |
IEEE 802.3z for 1000Base-X | |
3GPP Rel-15 for 5G NR | |
3GPP Rel-14 for 4G LTX | |
3GPP Rel-18 for 3G WCDMA | |
IEEE802.11b/g/n/a/ac for WLAN | |
IEEE802.11i for wireless security | |
IEEE802.11r for fast roaming | |
IEEE802.3af/at for PoE/PoE+ | |
WAN Mode | Link backup (access to Internet by WAN network or 5G dialing, WAN supports DHCP/static IP/PPPoE dialing); |
WiFi & 4G/5G roaming (wireless roaming or access to Internet by 5G dialing) | |
Cellular Network | 3G/4G/5G cellular network, network type 5G NR/LTE FDD/ LTE TDD/ WCDMA/ TD-SCDMA/ CDMA/ EVDO |
WLAN | WAP/WAP2 personal/enterprise edition encryption mode, hidden wireless SSID, wireless user isolation, wireless transmission power adjustment, maximum user limit, packet segmentation and RTS threshold, China/US wireless channel, WMM |
Management | Mobile network detection, local area network, dynamic domain name, UPnP settings, static DHCP, QoS, log management, device alias, access settings, timed restart, backup and recovery, firmware upgrade |
Security Policy | Wireless user black/white list, wireless user event notice, IP filtering, MAC filtering, URL filtering, keyword filtering, IP address black/white list, port forwarding, port redirection, DMZ settings |
VPN Tunnel | GRE, PPTP Client/Server, L2TP Client/Server, IPSec |
Multicast | Multicast Translate |
Troubleshooting | System Log, Ping Test and Route Tracking |
Routing Technique | VRRP, RIP, OSPF, routing list settings |
Time Management | NTP Client |
Wi-Fi Radio Frequency | 802.11B/g/n: 2.412GHz~2.4835GHz |
802.11Ac/n/a: 5.18GHz~5.825GHz | |
RF power output: 20dBm | |
Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM | |
Wi-Fi Receiving Sensitivity | 802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7 |
802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7 | |
802.11g/a: -91dBm@6Mbps, -72dBm@54Mbps | |
802.11b: -93dBm@1Mbps, -87dBm@11Mbps | |
802.11ac: -84dBm@MCS0, -59dBm@MCS9 | |
Wi-Fi Transmitting Power | 802.11n_HT40: 23dBm@MCS0, 20dBm@MCS7 |
802.11n_HT20: 23dBm@MCS0, 20dBm@MCS7 | |
802.11g/a: 23dBm@6Mbps, 20dBm@54Mbps | |
802.11b: 23dBm@1Mbps, 20dBm@11Mbps | |
802.11ac: 23dBm@MCS0, 20dBm@MCS9 | |
5G NR Operating Frequency Band | 5G NR: n1/n2/n3/n5/n7/n8/n12/n20/n28/n38/n40/n41/n48/n66/n71/n77/ |
n78/n79 | |
4G LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B14/B17/B18/B19/ | |
B20/B25/B26/B28/B29/B30/B32/B66/B71 | |
4G LTE-TDD: B34/B38/39/B40/B41/B42/B48 | |
3G WCDMA: B1/B2/B3/B4/B5/B6/B8/B19 | |
5G NR Bandwidth(downward, upward) | 5G SA: DL 2.1Gbps, UL 900Mbps |
5G NSA: DL 2.5Gbps, UL 650Mbps | |
LTE: DL 1Gbps, UL 200Mbps | |
WCDMA: DL 42Mbps, UL 5.76Mbps | |
Interface | Gigabit copper port: 3 10/100/1000Base-T(X) self-adaptive RJ45 LAN ports, support automatic flow control, full/half duplex mode, MDI/MDI-X self-adaption |
Gigabit COMBO port: 1 10/100/1000Base-T(X) self-adapting RJ45 port or 1000 Base-X SFP slot, it’s WAN port by default; The copper port supports automatic flow control, full/half duplex, MDI/MDI-X self-adaptation, and support PoE power receiving | |
Antenna interface: 2 2.4G antenna interfaces, RP-SMA-K(Female) | |
2 5.8G antenna interfaces, RP-SMA-K(Female) | |
4 5G Sub-6G antenna interfaces, SMA-K(Female) | |
Serial port (optional): 2 RS-232 and 2 RS-485/422, with 2*10-pin 3.5mm pitch terminal blocks (serial port occupies 14 pins) | |
CAN (optional): 2 CAN, with 2*10PIN 3.5mm pitch terminal blocks (CAN occupies 6 pins) | |
I/O port (optional): 4 DI and 4 DO, with 2*10PIN 3.5mm pitch terminal blocks | |
USB port: 1 Type-A USB 2.0 Female, this interface is reserved | |
SIM card slot: 1 Micro SIM card slot and 1 Nano SIM card slot, redundant backup; 1 Micro-SD card Slot for reservation | |
Console port: CLI command line management port(RS-232), RJ45 | |
Alarm port: 6-pin 5.08mm pitch terminal blocks (2 pins for relay), support 1 relay alarm output, this interface is reserved | |
Serial Port (optional) | Standard: EIA RS-232C, RS-485, RS-422 |
Quantity of serial port: 2 RS-232 serial ports, 2 RS-485/422 2IN1 serial ports | |
RS-232 signal: RXD, TXD, GND | |
RS-485 signal: D+, D-, GND | |
RS-422 signal: T+, T-, GND, R+, R- | |
Baud rate: 110bps-921600bps | |
Data bit: 5bit, 6bit, 7bit, 8bit | |
Parity bit: None, Even, Odd, Space, Mark | |
Stop bit: 1bit, 1.5bit, 2bit | |
Interface form: adopt 2*10PIN 3.5mm pitch terminal blocks (serial port occupies 14 pins) | |
Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC) | |
Load capacity: RS-485/422 end supports 32-node polling environment | |
Transmission distance: RS-232, 15m; RS-485/422, 1200m | |
Work modes: Realcom, TCP Server, TCP Client, UDP Server, UDP Client | |
CAN (optional) | Standard: CAN2.0A, CAN2.0B |
Interface quantity: 2 CAN ports | |
CAN signal: CANH, CANL | |
Duplex mode: 2-wire Half Duplex Mode | |
Baud Rate:5/10/20/50/100/125/250/500/800/1000kbps | |
Load capacity: support concurrent transmitting of 110 nodes | |
Transmission distance: 40m~10km | |
Interface form: 2*10PIN 3.5mm pitch terminal blocks (CAN occupies 6 pins) | |
Work mode: TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast | |
I/O Port (optional) | Interface quantity: 4 DI input, 4 DO output |
Interface form: 2*10PIN 3.5mm pitch terminal blocks (DI channel occupies 10 pins, DO channel occupies 8 pins) | |
DI: | |
Digital filtering: software configuration (1-65535ms) | |
Counter frequency: ≤1kHz | |
Working mode: DI or counter | |
Input type: | |
- dry contact (ON: GND short circuit; OFF: open circuit) | |
- wet contact Source(NPN) (ON: 0~3VDC; OFF: 10~30VDC) | |
- wet contact Sink(PNP) (ON: 10~30VDC; OFF: 0~3VDC) | |
DO: | |
Pulse frequency: ≤ 500Hz | |
Working mode: DO or pulse output | |
Output type: Sink (PNP) | |
Rated current: 200mA/Channel | |
Overcurrent protection: 650mA/Channel | |
Overvoltage protection: 45VDC | |
Power Supply | WAN port: supports PoE power receiving, which conforms to IEEE802.3af/at standard |
Power supply terminal: supports 12~48VDC single power and dual power input, supports input redundancy and nonpolarity, adopting 6-pin 5.08mm pitch terminal block(4-pin power supply) | |
Indicator | Running indicator, alarm indicator, power indicator, 2.4G indicator, 5.8G indicator, Wireless bridge signal strength indicator, interface indicator, PoE indicator, 5G indicator, 5G bridge signal strength indicator, USB indicator, SD card indicator, SIM card indicator, serial port indicator, CAN port indicator, DI indicator, DO indicator |
Power Consumption | ICPE2300A-BW-8A25-1GC3GT-PD2P12_48 |
No-load: 6.5W@24VDC | |
Full-load: 20.0W@24VDC | |
Working Environment | Operating temperature: -40~75℃ |
Storage temperature:-40~85℃ | |
Relative humidity: 5%~95%(no condensation) | |
Physical Characteristic | Housing: IP40 protection, metal |
Installation: DIN-Rail mounting | |
Dimension (W x H x D): 88mm×150mm×135mm | |
Weight: 1.68kg (ICPE2300A-BW-8A25-1GC3GT-PD2P12_48) | |
Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3 |
Air discharge:± 8kV | |
Contact discharge: ±6kV | |
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3 | |
Power supply: ±2kV | |
Ethernet port: ±1kV | |
IEC 61000-4-5 (Surge), Level 3 | |
Power supply: common mode±2kV, differential mode±1kV | |
Ethernet interface: ±2kV | |
Shock: IEC 60068-2-27 | |
Free fall: IEC 60068-2-32 | |
Vibration: IEC 60068-2-6 | |
MTBF | >250000 hours |
Authentication | CE, FCC, RoHS |
ICPE2300 Indoor 5G Wireless Router
CPE2300 serisi endüstriyel 5G kablosuz switch, PoE güç alımı IEEE802.3af/at protokol standardına uygundur. Bu serinin iki ürünü vardır, COMBO portu, Gigabit bakır portu, USB, 2.4G anten arayüzü, 5.8G anten arayüzü ve 5G Sub-6G anten arayüzü, RS-232, RS-485/422, CAN ve I/O dahil olmak üzere çoklu arayüzler sağlar. Farklı uygulama sahnelerinin gereksinimlerini karşılayabilen DIN-Ray montajını benimser.
Ağ yönetim sistemi 3G/4G/5G Hücresel WAN, WAN Ayarları, WIFI ve 4G/5G dolaşım, ICMP Bağlantı Testi, Bağlantı Yedekleme, Dinamik Alan Adı, Yönlendirme Listesi Ayarı, WLAN Ayarları, Port Yönlendirme, Port Yeniden Yönlendirme, DMZ Ayarları, UPnP Ayarları, VRRP, RIP, OSPF, Statik DHCP, QoS vb. gibi çoklu yazılım işlevlerini destekler.
Ayrıca IP Filtreleme, MAC Filtreleme, URL Filtreleme ve Anahtar Kelime Filtreleme ve IP Adresi Siyah/Beyaz Listesi gibi güvenlik duvarı işlevlerini ve GRE, IPSec, PPTP, L2TP dahil VPN tünelleme işlevlerini de destekler. Her seri port veya CAN portu 4 TCP veya UDP oturumunu destekler ve TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang ve UDP Multicast gibi çoklu çalışma modlarını destekler. I/O portu DI, Counter, DO ve Pulse Output gibi çalışma modlarını destekler. Ağ yönetim sistemi, kullanıcı dostu arayüz tasarımı ve kolay ve rahat kullanımı sayesinde size harika bir kullanıcı deneyimi sunabilir.
- 1 Gigabit COMBO bağlantı noktası (WAN/LAN, isteğe bağlı RJ45 veya SFP yuvası), 3 Gigabit bakır bağlantı noktası (LAN), 2 2.4G anten arabirimi, 2 5.8G anten arabirimi ve 4 5G Alt 6G anten arabirimini destekler (2 RS-232, 2 RS-485/422, 2 CAN ve 4 I/O isteğe bağlıdır)
- CAN portu ve seri port TCP Server, TCP Client, UDP Server, UDP Client gibi çoklu çalışma modlarını destekler.
- I/O portu DI, Counter, DO ve Pulse Output gibi çalışma modlarını destekler. DI kanalı ve DO kanalı Modbus TCP Master üzerinden yönetilebilir.
- 3G/4G LTE tüm ağlarla uyumlu 5G NR hücresel kablosuz ağ desteği
- 2.4GHz ve 5.8GHz çift bant desteği
- 12 ~ 48VDC tek güç kaynağı çift girişini destekler ve WAN bağlantı noktası 48VDC PoE güç kaynağı girişini destekler
- 40 ~ 75 ℃ geniş çalışma sıcaklığı aralığını destekler