ICPE2300 DIN-Rail Industrial Indoor 5G Wireless Router

İletişime Geçiniz ICPE2300 DIN-Rail Industrial Indoor 5G Wireless Router

ICPE2300 Indoor 5G Wireless Router Sipariş Numaraları


 

Available ModelsGigabitAntenna InterfaceSerial PortCANI/O PortPower Supply
COMBORJ452.4G5.8G5G Sub-6GRS-232RS-485/422DIDO
ICPE2300A-BW-8A25-1GC3GT-PD2P12_481322412~48VDC or PoE power receiving
ICPE2300-2A-1GC3GT-2C4D4IO-2225-2LV13224222  

ICPE2300 Serisi Indoor 5G Wireless Router Teknik Özellikleri

 


 

Standard & ProtocolIEEE 802.3 for 10Base-T
IEEE802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
3GPP Rel-15 for 5G NR
3GPP Rel-14 for 4G LTX
3GPP Rel-18 for 3G WCDMA
IEEE802.11b/g/n/a/ac for WLAN
IEEE802.11i for wireless security
IEEE802.11r for fast roaming
IEEE802.3af/at for PoE/PoE+
WAN ModeLink backup (access to Internet by WAN network or 5G dialing, WAN supports DHCP/static IP/PPPoE dialing);
 WiFi & 4G/5G roaming (wireless roaming or access to Internet by 5G dialing)
Cellular Network3G/4G/5G cellular network, network type 5G NR/LTE FDD/ LTE TDD/ WCDMA/ TD-SCDMA/ CDMA/ EVDO
WLANWAP/WAP2 personal/enterprise edition encryption mode, hidden wireless SSID, wireless user isolation, wireless transmission power adjustment, maximum user limit, packet segmentation and RTS threshold, China/US wireless channel, WMM
ManagementMobile network detection, local area network, dynamic domain name, UPnP settings, static DHCP, QoS, log management, device alias, access settings, timed restart, backup and recovery, firmware upgrade
Security PolicyWireless user black/white list, wireless user event notice, IP filtering, MAC filtering, URL filtering, keyword filtering, IP address black/white list, port forwarding, port redirection, DMZ settings
VPN TunnelGRE, PPTP Client/Server, L2TP Client/Server, IPSec
MulticastMulticast Translate
TroubleshootingSystem Log, Ping Test and Route Tracking
Routing TechniqueVRRP, RIP, OSPF, routing list settings
Time ManagementNTP Client
Wi-Fi Radio Frequency802.11B/g/n: 2.412GHz~2.4835GHz
802.11Ac/n/a: 5.18GHz~5.825GHz
RF power output: 20dBm
Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM
Wi-Fi Receiving Sensitivity802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7
802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7
802.11g/a: -91dBm@6Mbps, -72dBm@54Mbps
802.11b: -93dBm@1Mbps, -87dBm@11Mbps
802.11ac: -84dBm@MCS0, -59dBm@MCS9
Wi-Fi Transmitting Power802.11n_HT40: 23dBm@MCS0, 20dBm@MCS7
802.11n_HT20: 23dBm@MCS0, 20dBm@MCS7
802.11g/a: 23dBm@6Mbps, 20dBm@54Mbps
802.11b: 23dBm@1Mbps, 20dBm@11Mbps
802.11ac: 23dBm@MCS0, 20dBm@MCS9
5G NR Operating Frequency Band5G NR: n1/n2/n3/n5/n7/n8/n12/n20/n28/n38/n40/n41/n48/n66/n71/n77/
n78/n79
4G LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B14/B17/B18/B19/
B20/B25/B26/B28/B29/B30/B32/B66/B71
4G LTE-TDD: B34/B38/39/B40/B41/B42/B48
3G WCDMA: B1/B2/B3/B4/B5/B6/B8/B19
5G NR Bandwidth(downward, upward)5G SA: DL 2.1Gbps, UL 900Mbps
5G NSA: DL 2.5Gbps, UL 650Mbps
LTE: DL 1Gbps, UL 200Mbps
WCDMA: DL 42Mbps, UL 5.76Mbps
InterfaceGigabit copper port: 3 10/100/1000Base-T(X) self-adaptive RJ45 LAN ports, support automatic flow control, full/half duplex mode, MDI/MDI-X self-adaption
Gigabit COMBO port: 1 10/100/1000Base-T(X) self-adapting RJ45 port or 1000 Base-X SFP slot, it’s WAN port by default; The copper port supports automatic flow control, full/half duplex, MDI/MDI-X self-adaptation, and support PoE power receiving
Antenna interface: 2 2.4G antenna interfaces, RP-SMA-K(Female)
2 5.8G antenna interfaces, RP-SMA-K(Female)
4 5G Sub-6G antenna interfaces, SMA-K(Female)
Serial port (optional): 2 RS-232 and 2 RS-485/422, with 2*10-pin 3.5mm pitch terminal blocks (serial port occupies 14 pins)
CAN (optional): 2 CAN, with 2*10PIN 3.5mm pitch terminal blocks (CAN occupies 6 pins)
I/O port (optional): 4 DI and 4 DO, with 2*10PIN 3.5mm pitch terminal blocks
USB port: 1 Type-A USB 2.0 Female, this interface is reserved
SIM card slot: 1 Micro SIM card slot and 1 Nano SIM card slot, redundant backup; 1 Micro-SD card Slot for reservation
Console port: CLI command line management port(RS-232), RJ45
Alarm port: 6-pin 5.08mm pitch terminal blocks (2 pins for relay), support 1 relay alarm output, this interface is reserved
Serial Port (optional)Standard: EIA RS-232C, RS-485, RS-422
Quantity of serial port: 2 RS-232 serial ports, 2 RS-485/422 2IN1 serial ports
RS-232 signal: RXD, TXD, GND
RS-485 signal: D+, D-, GND
RS-422 signal: T+, T-, GND, R+, R-
Baud rate: 110bps-921600bps
Data bit: 5bit, 6bit, 7bit, 8bit
Parity bit: None, Even, Odd, Space, Mark
Stop bit: 1bit, 1.5bit, 2bit
Interface form: adopt 2*10PIN 3.5mm pitch terminal blocks (serial port occupies 14 pins)
Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC)
Load capacity: RS-485/422 end supports 32-node polling environment
Transmission distance: RS-232, 15m; RS-485/422, 1200m
Work modes: Realcom, TCP Server, TCP Client, UDP Server, UDP Client
CAN (optional)Standard: CAN2.0A, CAN2.0B
Interface quantity: 2 CAN ports
CAN signal: CANH, CANL
Duplex mode: 2-wire Half Duplex Mode
Baud Rate:5/10/20/50/100/125/250/500/800/1000kbps
Load capacity: support concurrent transmitting of 110 nodes
Transmission distance: 40m~10km
Interface form: 2*10PIN 3.5mm pitch terminal blocks (CAN occupies 6 pins)
Work mode: TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast
I/O Port (optional)Interface quantity: 4 DI input, 4 DO output
Interface form: 2*10PIN 3.5mm pitch terminal blocks (DI channel occupies 10 pins, DO channel occupies 8 pins)
DI:
Digital filtering: software configuration (1-65535ms)
Counter frequency: ≤1kHz
Working mode: DI or counter
Input type:
- dry contact (ON: GND short circuit; OFF: open circuit)
- wet contact Source(NPN) (ON: 0~3VDC; OFF: 10~30VDC)
- wet contact Sink(PNP) (ON: 10~30VDC; OFF: 0~3VDC)
DO:
Pulse frequency: ≤ 500Hz
Working mode: DO or pulse output
Output type: Sink (PNP)
Rated current: 200mA/Channel
Overcurrent protection: 650mA/Channel
Overvoltage protection: 45VDC
Power SupplyWAN port: supports PoE power receiving, which conforms to IEEE802.3af/at standard
Power supply terminal: supports 12~48VDC single power and dual power input, supports input redundancy and nonpolarity, adopting 6-pin 5.08mm pitch terminal block(4-pin power supply)
IndicatorRunning indicator, alarm indicator, power indicator, 2.4G indicator, 5.8G indicator, Wireless bridge signal strength indicator, interface indicator, PoE indicator, 5G indicator, 5G bridge signal strength indicator, USB indicator, SD card indicator, SIM card indicator, serial port indicator, CAN port indicator, DI indicator, DO indicator
Power ConsumptionICPE2300A-BW-8A25-1GC3GT-PD2P12_48
No-load: 6.5W@24VDC
Full-load: 20.0W@24VDC
Working EnvironmentOperating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%~95%(no condensation)
Physical CharacteristicHousing: IP40 protection, metal
Installation: DIN-Rail mounting
Dimension (W x H x D): 88mm×150mm×135mm
Weight: 1.68kg (ICPE2300A-BW-8A25-1GC3GT-PD2P12_48)
Industrial StandardIEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge:± 8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
Power supply: ±2kV
Ethernet port: ±1kV
IEC 61000-4-5 (Surge), Level 3
Power supply: common mode±2kV, differential mode±1kV
Ethernet interface: ±2kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF>250000 hours
AuthenticationCE, FCC, RoHS

 

ICPE2300 Indoor 5G Wireless Router


 

CPE2300 serisi endüstriyel 5G kablosuz switch, PoE güç alımı IEEE802.3af/at protokol standardına uygundur. Bu serinin iki ürünü vardır, COMBO portu, Gigabit bakır portu, USB, 2.4G anten arayüzü, 5.8G anten arayüzü ve 5G Sub-6G anten arayüzü, RS-232, RS-485/422, CAN ve I/O dahil olmak üzere çoklu arayüzler sağlar. Farklı uygulama sahnelerinin gereksinimlerini karşılayabilen DIN-Ray montajını benimser.

Ağ yönetim sistemi 3G/4G/5G Hücresel WAN, WAN Ayarları, WIFI ve 4G/5G dolaşım, ICMP Bağlantı Testi, Bağlantı Yedekleme, Dinamik Alan Adı, Yönlendirme Listesi Ayarı, WLAN Ayarları, Port Yönlendirme, Port Yeniden Yönlendirme, DMZ Ayarları, UPnP Ayarları, VRRP, RIP, OSPF, Statik DHCP, QoS vb. gibi çoklu yazılım işlevlerini destekler.

Ayrıca IP Filtreleme, MAC Filtreleme, URL Filtreleme ve Anahtar Kelime Filtreleme ve IP Adresi Siyah/Beyaz Listesi gibi güvenlik duvarı işlevlerini ve GRE, IPSec, PPTP, L2TP dahil VPN tünelleme işlevlerini de destekler. Her seri port veya CAN portu 4 TCP veya UDP oturumunu destekler ve TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang ve UDP Multicast gibi çoklu çalışma modlarını destekler. I/O portu DI, Counter, DO ve Pulse Output gibi çalışma modlarını destekler. Ağ yönetim sistemi, kullanıcı dostu arayüz tasarımı ve kolay ve rahat kullanımı sayesinde size harika bir kullanıcı deneyimi sunabilir.

 

 

  • 1 Gigabit COMBO bağlantı noktası (WAN/LAN, isteğe bağlı RJ45 veya SFP yuvası), 3 Gigabit bakır bağlantı noktası (LAN), 2 2.4G anten arabirimi, 2 5.8G anten arabirimi ve 4 5G Alt 6G anten arabirimini destekler (2 RS-232, 2 RS-485/422, 2 CAN ve 4 I/O isteğe bağlıdır)
  • CAN portu ve seri port TCP Server, TCP Client, UDP Server, UDP Client gibi çoklu çalışma modlarını destekler.
  • I/O portu DI, Counter, DO ve Pulse Output gibi çalışma modlarını destekler. DI kanalı ve DO kanalı Modbus TCP Master üzerinden yönetilebilir.
  • 3G/4G LTE tüm ağlarla uyumlu 5G NR hücresel kablosuz ağ desteği
  • 2.4GHz ve 5.8GHz çift bant desteği
  • 12 ~ 48VDC tek güç kaynağı çift girişini destekler ve WAN bağlantı noktası 48VDC PoE güç kaynağı girişini destekler
  • 40 ~ 75 ℃ geniş çalışma sıcaklığı aralığını destekler

Yorum Yap

Not: HTML'e dönüştürülmez!
    Kötü           İyi

Doğrulama Kodu
  • Görünüm: 293
  • Ürün Kodu: ICPE2300
  • Stok Durumu: İletişime Geçiniz

Etiketler: ICPE2300, ICPE2300 serisi switch, ICPE2300 serisi endüstriyel 5G kablosuz router, RS-232 router, RS-485/422 router, CAN router, I/O router, endüstriyel 5G kablosuz router