4G LTE Cat4 Endüstriyel Hücresel Router RUT956

İletişime Geçiniz

Resim İçin Tıklayınız

RUT956 4G LTE Cat4 Endüstriyel Hücresel Router Teknik Spektler

MOBILE
Mobile module	4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps

SIM switch	2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status	IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD	Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list	Operator black/white list (by country or separate operators)

Multiple PDN	Possibility to use different PDNs for multiple network access and services

Band management	Band lock, Used band status display

APN	Auto APN

Bridge	Direct connection (bridge) between mobile ISP and device on LAN

Passthrough	Router assigns its mobile WAN IP address to another device on LAN


WIRELESS
Wireless mode	IEEE 802.11b/g/n, Access Point (AP), Station (STA)

Wi-Fi security	WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect

SSID/ESSID	SSID stealth mode and access control based on MAC address

Wi-Fi users	Up to 100 simultaneous connections

Wireless Connectivity Features	Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

Wireless MAC filter	Whitelist, blacklist


NETWORK
Hotspot	Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

Routing	Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network protocols	TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support	H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring	Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall	Port forward, traffic rules, custom rules

DHCP	Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM)	Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS	Supported >25 service providers, others can be configured manually

Network backup	Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing	Balance Internet traffic over multiple WAN connections

SSHFS	Possibility to mount remote file system via SSH protocol


ETHERNET
WAN	1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX

LAN	3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX


SECURITY
Authentication	Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall	Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention	DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN	Port and tag-based VLAN separation

Mobile quota control	Mobile data limit, customizable period, start time, warning limit, phone number

WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control	Flexible access control of SSH, Web interface, CLI and Telnet


VPN
OpenVPN	Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption	DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256


IPsec	IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE	GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP	Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel	Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN	Method of building scalable IPsec VPNs

SSTP	SSTP client instance support

ZeroTier	ZeroTier VPN client support

WireGuard	WireGuard VPN client and server support

Tinc	Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.


BACNET
Supported modes	Router

Supported connection types	RS485, TCP


OPC UA
Supported modes	Client, Server

Supported connection types	TCP


MODBUS
Supported modes	Server, Client

Supported connection types	RTU (RS232, RS485), TCP, USB

Custom registers	MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats	8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII


DATA TO SERVER
Protocol	HTTP(S), MQTT, Azure MQTT, Kinesis


MQTT GATEWAY
Modbus MQTT Gateway	Allows sending commands and receiving data from MODBUS Server through MQTT broker


DNP3
Supported modes	Station, Outstation

Supported connection types	RS232, RS485, TCP, USB


DLMS
DLMS Support	DLMS - standard protocol for utility meter data exchange

Supported modes	Client

Supported connection types	RS232, RS485, TCP


MONITORING & MANAGEMENT
WEB UI	HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

FOTA	Firmware update from server, automatic notification

SSH	SSH (v1, v2)

SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call	Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off

TR-069	OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT	MQTT Broker, MQTT publisher

SNMP	SNMP (v1, v2, v3), SNMP Trap

JSON-RPC	Management API over HTTP/HTTPS

RMS	Teltonika Remote Management System (RMS)


IOT PLATFORMS
Cloud of Things	Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx	Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity	Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

Azure IoT Hub	Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type


SYSTEM CHARACTERISTICS
CPU	Mediatek, 580 MHz, MIPS 24KEc

RAM	128 MB, DDR2

FLASH storage	16 MB, SPI Flash


FIRMWARE / CONFIGURATION
WEB UI	Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA	Update FW

RMS	Update FW/configuration for multiple devices at once

Keep settings	Update FW without losing current configuration

Factory settings reset	A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration


LOCATION TRACKING
GNSS	GPS, GLONASS, BeiDou, Galileo and QZSS

Coordinates	GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA	NMEA 0183

NTRIP	NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

Server software	Supported server software TAVL, RMS

Geofencing	Configurable multiple geofence zones


SERIAL
RS232	DB9 connector, RS232 (with RTS, CTS flow control)

RS485	RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate

Serial functions	Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client


USB
Data rate	USB 2.0

Applications	Samba share, USB-to-serial

External devices	Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter

Storage formats	FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4


INPUT / OUTPUT
Input	1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)

Output	1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)

Events	Email, RMS, SMS

I/O juggler	Allows to set certain I/O conditions to initiate event


POWER
Connector	4-pin industrial DC power socket

Input voltage range	9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

PoE (passive)	Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC

Power consumption	< 2 W idle, < 7 W Max


PHYSICAL INTERFACES
Ethernet	4 x RJ45 ports, 10/100 Mbps

I/O’s	2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector (available from HW revision 1600)

Status LEDs	1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power

SIM	2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)

Power	1 x 4-pin power connector

Input/output	1 x 10-pin industrial socket for inputs/outputs

Antennas	2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS

USB	1 x USB A port for external devices

RS232	1 x DB9 socket

RS485	1 x 6-pin industrial socket

Reset	Reboot/User default reset/Factory reset button


PHYSICAL SPECIFICATION
Casing material	Aluminium housing, plastic panels

Dimensions (W x H x D)	110 x 50 x 100 mm

Weight	287 g

Mounting options	DIN rail, wall mount, flat surface (all require additional kit)


OPERATING ENVIRONMENT
Operating temperature	-40 °C to 75 °C

Operating humidity	10% to 90% non-condensing

Ingress Protection Rating	IP30

RUT956 4G LTE Cat4 Endüstriyel Hücresel Wi-Fi Yönlendirici

Industrial Cellular Router. RS232 RS485 Wi-Fi yönlendirici RUT956, hücresel, Wi-Fi ve kablolu bağlantı seçeneklerini otomatik WAN yük devretme ve GNSS özellikleriyle birleştiren endüstriyel bir yönlendiricidir. Seri iletişim arayüzleri, daha çeşitli cihazların çözüm ekosistemine entegre edilmesini sağlarken, G/Ç ve gelişmiş RutOS yazılımı ekipman kontrolünü, otomasyonu ve olay bildirimlerini kolaylaştırır.

Özellikler

BAĞLANTI: 4G LTE (Cat 4), 3G, 2G
ÇİFT SIM: Otomatik yük devretme, yedek WAN ve diğer anahtarlama senaryoları ile
ÇOKLU ARAYÜZLER: Ethernet, Seri (RS232, RS485) ve çoklu Giriş/Çıkış
GNSS: Konum hizmetleri ve zaman senkronizasyonu için Küresel Navigasyon Uydu Sistemi