TCC-100-T @ Endüstriyel Tip RS232 to RS422/RS485 Çevirici

İletişime Geçiniz

Resim İçin Tıklayınız

TCC-100-T Endüstriyel Tip RS232 to RS422/RS485 Çevirici Teknik Özellikleri

Serial Interface
Baudrate	50 bps to 921.6 kbps (supports non-standard baudrates)
Connector	Terminal block
No. of Ports	2
Pull High/Low Resistor for RS-485	1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control	ADDC (automatic data direction control)
Serial Standards	RS-232
	RS-422
	RS-485
Terminator for RS-485	N/A, 120 ohms, 120 kilo-ohms
Serial Signals
RS-232	TxD, RxD, RTS, CTS, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND
Power Parameters
Input Current	50 to 85 mA @ 12 to 48 VDC
Input Voltage	12 to 48 VDC
No. of Power Inputs	1
Overload Current Protection	Supported
Power Connector	Terminal block (for DC models)
Physical Characteristics
Housing	Metal
Dimensions	67 x 100.4 x 22 mm (2.64 x 3.93 x 0.87 in)
IP Rating	IP30
Weight	148 g (0.33 lb)
Installation	DIN-rail mounting (with optional kit)
	Wall mounting
Environmental Limits
Operating Temperature	-40 to 85°C (-40 to 185°F)
Storage Temperature (package included)	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Standards and Certifications
EMC	EN 55032/35
EMI	CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
	IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
	IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
	IEC 61000-4-5 Surge: Power: 1 kV
	IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
	IEC 61000-4-8 PFMF
Environmental Testing	IEC 60068-2-1
	IEC 60068-2-2
	IEC 60068-2-3
Safety	UL 60950-1
Vibration	IEC 60068-2-6
MTBF
Time	3,017,857 hrs
Standards	Telcordia (Bellcore), GB

TCC-100-T RS232 to RS485/RS422 Çevirici, Geniş Çalışma Sıcaklığı Aralığı, -40 to 85°C

Kontrol sistemlerinde RS232 to RS485/RS422 sinyal çevirici olarak çalışmaktadır. Geniş Çalışma sıcaklığı değerleri ile endüstriyel uygulamalarda kullanılmaya uygundur.